Shipping Japanese Fishing Rods and Tackle Overseas
Before buying a Japanese multi-piece, telescopic, lure or boat rod, check collapsed length, rigid-tube packing, longest side, volumetric weight and batteries.
Start here
A 2.1 m fishing length is not necessarily the parcel length and says nothing about sections. Obtain collapsed length, section count, rod-bag and seller-carton data before purchase. JChere's large special-item route includes long rods that exceed ordinary limits.
Check JChere's current restrictions and special routes first
Use collapsed length, not fishing length
A telescopic rod retracts, a multi-piece rod separates, and a one-piece rod remains almost full length. Cartons can differ widely for the same stated fishing length. The finished longest side and girth determine freight and route.
- Ask the seller for collapsed length and carton photographs.
- Include cap, butt, guides and handle projections in the dimensions.
- Do not assume the warehouse can cut, unbond or bend a rod.
Rigid tube, bend protection and restraint
A tip and guides can fail under slight bending or local pressure. A soft factory sleeve or thin domestic carton may not withstand international handling. Use a correctly sized rigid tube or reinforced long carton and restrain both ends.
- Sleeve sections and prevent axial sliding inside the tube.
- Protect the tip, guides and reel seat without pressing them sideways.
- Avoid an oversized tube because excess diameter sharply increases volumetric weight.
Tackle can change the classification
An ordinary reel, hook and lure can be declared specifically, but an electric reel or fish finder may contain a battery, an inflatable vest a gas cylinder, attractant or grease a liquid, and natural materials may face quarantine.
- List battery installation, count and Wh separately from the rod.
- Do not send a gas cartridge, aerosol, fuel or unidentified liquid as part of a set.
- Check quarantine and CITES for feather, hide, coral or protected material.